1. Scriber

The first tool for marking workpieces. Made in the form of a ballpoint pen with a clip for easy carrying in your pocket. The tungsten tip leaves a fine and distinct line on steel and glass, not to mention softer materials such as wood and non-ferrous metals.

Price: 276 rubles.

2. Automatic center punch

One of the most essential tools in the plumbing business. Allows you to mark places for making holes, leaving small holes that prevent the drill from slipping and increase the accuracy of work. You just need to put the hardened tip to the surface of the material and press the center punch. There are models with a round handle and without it. The first ones are a little more expensive, but much more convenient.

Price: from 189 rubles.

3. Metric thread gauge

A useful device for measuring the pitch of internal and external threads from 0.25 to 6 mm. Useful for controlling and creating screw threads. Each of the blades is signed and corresponds to its size. It is very simple to use: just attach one of the blades to the threads and look at its marking.

Price: 495 rubles.

4. A set of taps and dies

Universal set of tools for creating internal and external threads. The set includes taps M3, M4, M5, M6, M8, M10, M12 — three for each size (for blind and through holes), dies M3, M4, M5, M6, M8, M10, M12, as well as holders for him and auxiliary accessories, including a thread gauge.

Price: 1 866 rubles.

5. Set of taps‑drills

A special tool that drills a hole and simultaneously forms a thread in it. The taps are made of high speed steel and have hex shank for installation in a screwdriver. There are six pieces in the set: M3, M4, M5, M6, M8, M10.

Price: from 360 rubles.

6. Step drills

A set of three step drills that are very useful for making large holes in sheet metal and soft materials. The hexagonal shank is designed specifically for use with a drill or screwdriver. Sizes — 3-12 mm, 4-12 mm, 4-20 mm.

Price: from 577 rubles.

7. Deburring tool

A handy tool that will help you quickly deburr and cleanly chamfer bolts, studs, as well as pipes and small bars. Suitable for workpieces up to 28 mm in diameter. There are two versions to choose from: with a standard hex shank and with a triangular shank.

Price: from 247 rubles.

8. Countersink

This tool also allows you to chamfer and burr, but already in the holes. Useful for expanding them to hide the screw heads. The diameter in the largest part is 13 mm, the shank is hexagonal.

Price: 120 rubles.

9. Chabert

Locksmith’s tool, the main function of which is to remove burrs from the edges of sheet materials and holes. The curved knife cuts off everything superfluous, and thanks to the comfortable handle, you can work without the risk of scratching. Includes 10 spare blades (also sold separately).

Price: 290 rubles.

10. Bolt extractors

And these devices are useful for extracting broken bolts and studs. A hole is drilled in the damaged fastener, then the extractor is screwed into it. He bites into the rest of the bolt or stud and, due to the left thread, unscrews the chip. The kit includes eight extractors of various sizes to work with fasteners with a diameter of 4 to 45 mm.

Price: 1,510 rubles.

11. Nut extractors

Similar to the previous tool, but for loosening nuts with “licked” edges. It works on the same principle: due to left-sided notches. The head is put on the damaged fastener, securely hooked and allows you to unscrew it. The set contains 13 extractors with a diameter of 8 to 19 mm.

Price: 1 368 rubles.

12. Gaykolom

Another assistant in dismantling damaged fasteners, which will help out in the most neglected cases and help defeat completely rusted nuts. The tool is put on from above, after which the rod with a sharp chisel at the end is tightened with a regular wrench and simply cuts the stubborn nut. There are three versions of the product, which differ in size: 12, 14 and 18 mm.

Price: 787 rubles.

13. Stamps

Die-cutting stamps with numbers and all letters of the Latin alphabet, which are useful for stuffing various signatures on tools, metal and other surfaces. There are many options to choose from with font sizes from 2 to 12.5 mm.

Price: from 771 rubles.

14. Pipe cutter

A miniature device that allows you to cut copper, brass, aluminum and plastic pipes, getting a perfectly smooth edge with a rounded bevel. Put the tool over the pipe, tighten the clamping screw and rotate the device while holding the pipe itself. On sale version for diameters 3–16 mm.

Price: 866 rubles.

15. Butter dish

A solid oiler with a reservoir made of durable transparent plastic and a flexible spout that allows you to get into the most inconvenient places. The peculiarity of the device is that its contents are literally injected under pressure. Thanks to this, it is possible to thoroughly lubricate the nodes where oil would not get in the usual way.

Price: 297 rubles.
Please note: prices are valid at the time of publication of the article. Stores can update the cost of goods during the day.

Read also 🧐


Оставьте комментарий